Mapei Fiberplan Xtra zak 12,2 kg
Vloeibare driecomponenten epoxymortel, voor het herstellen van aangetaste betonelementen en voor precisieverankering. Kit 12,2 kg.
Fluid three-component epoxy mortar for the reparation of damaged concrete structures and precision fastening. Planigrout 300 is used for repairing damaged concrete structures, for example overhead and bridge-crane runways in industries and shipyards. More in general, for evening-out concrete surfaces in areas that are difficult to reach. Thanks to the fact that Planigrout 300 hardens without shrinking, the product can be used as a mortar for precision fastening. Planigrout 300 can also be used for preparing industrial flooring with very high mechanical strength, such as workshops, garages and warehouses subject to intense rubber wheel trolley traffic. First mix part A with part B, then, after adding part C, remix until a homogeneous lump-free mixture is obtained. Planigrout 300 meets the minimum requirements of EN 1504-6. Consumption 2 kg/m2 per mm of thickness. Packaging 36.6 kg units (A B C): - part A: 4.8 kg - part B: 1.8 kg - part C: 30 kg 12.2 kg units (A B C): - part A: 1.6 kg - part B: 0.6 kg - part C: 10 kg
Leverancier: | Mapei Nederland B.V. |
---|---|
Merk/Fabrikant: | Mapei Nederland B.V. |
Artikelcode: | 048212K |
Beschikbaarheid: | Actueel |
Bijgewerkt op: | 15 april 2024 om 17:52 |
Handelseenheden
Bijlagen
- DoP (DoP-certificaat Fiberplan Xtra)
- Productdatablad (Productdatablad Fiberplan Xtra)
- Veiligheidsblad (Veiligheidsblad Fiberplan Xtra)
- GEV
Afbeeldingen
- Fiberplan Xtra_20230405.png
Classificatie
IB-classificatie:
Levering |
||
---|---|---|
Fabriek | Italië | |
URL |
||
URL Fabrikant | http://www.mapei.com/NL-NL/ | |
URL Prestatieverklaring (DoP) | https://www.mapei.com/nl/nl/tools-downloads/bibliotheek/productbibliotheek | |
Indelingen |
||
Artikelgroep | Bouw | |
Fabrikantindeling 1 | Bouw | |
Fabrikantindeling 2 | Fiberplan Xtra | |
Afmetingen |
||
Laagdikte | 20 mm | |
Gewicht |
||
Gewicht (kg) | 12,2 | |
Gewicht eenheid | zak | |
Kleur en Oppervlak |
||
Kleur | Donkergrijs | |
Tekst |
||
Uitgebreide toelichting 1 | Vloeibare driecomponenten epoxymortel, voor het herstellen van aangetaste betonelementen en voor precisieverankering. Kit 12,2 kg. | |
Uitgebreide toelichting 4 | Fluid three-component epoxy mortar for the reparation of damaged concrete structures and precision fastening. Planigrout 300 is used for repairing damaged concrete structures, for example overhead and bridge-crane runways in industries and shipyards. More in general, for evening-out concrete surfaces in areas that are difficult to reach. Thanks to the fact that Planigrout 300 hardens without shrinking, the product can be used as a mortar for precision fastening. Planigrout 300 can also be used for preparing industrial flooring with very high mechanical strength, such as workshops, garages and warehouses subject to intense rubber wheel trolley traffic. First mix part A with part B, then, after adding part C, remix until a homogeneous lump-free mixture is obtained. Planigrout 300 meets the minimum requirements of EN 1504-6. Consumption 2 kg/m2 per mm of thickness. Packaging 36.6 kg units (A B C): - part A: 4.8 kg - part B: 1.8 kg - part C: 30 kg 12.2 kg units (A B C): - part A: 1.6 kg - part B: 0.6 kg - part C: 10 kg | |
Normering en certificering |
||
Mortelklasse | EN 1504-6 | |
Gebruik en Verwerking |
||
Toepassing | Planigrout 300 wordt gebruikt voor het repareren van bijvoorbeeld brug-kraanbanen in de industrie en op scheepswerven, maar ook voor betonnen oppervlakken in gebieden die moeilijk bereikbaar zijn. | |
Verwerking | Omdat Planigrout 300 uithardt zonder krimp, kan het gebruikt worden als mortel voor precisiebevestigingen, maar ook voor het repareren van industriële vloeren met zeer hoge mechanische eigenschappen zoals werkplaatsen, garages, magazijnen waar zwaar heftruck verkeer plaatsvindt. Meng eerst deel A met deel B, dan na toevoeging van deel C, remix totdat een homogeen en klontvrij mengsel is verkregen. | |
Verbruik | 2 kg/m2 per mm laagdikte | |
Houdbaarheid | 12 maanden | |
Houdbaarheid (maanden) | 12 | |
Verwerkingstemperatuur | 10-35 gr. C. | |
Verwerkingstijd | 1 uur | |
Opentijd | 6-8 uur | |
Uithardingstijd | 7 dagen | |
Sterkte |
||
Druksterkte volgens EN 998-2 | C40 | |
Elastisch | Ja | |
Buigsterkte volgens EN 13813 | F7 | |
Materiaal |
||
Soort mortel | Overig | |
Bindmiddel | Cement | |
Vezelversterkt | Ja |